Install active server pages server 2003

On the right pane, a list of web service extensions and the status Prohibited or Allowed for each are shown. Based on your requirement, select a Web Service Extension name which is Prohibited, right click and select Allow to enable. We also have the option to allow all extensions for a specific application. Select the Allow all Web service extensions for a particular application icon in the Tasks section and then select the application from a dropdown box. NET based applications which provide better customization, scalability and security run on.

NET architecture mechanism. Web Development. Share on Facebook. Related Articles. What is Robotics and its Importance? All Rights Reserved. The Netlogon service may also need to be restarted. Netdiag is included with the Windows Support tools. Note: The server may need to reregister its IP configuration by using Ipconfig after you run Netdiag. Manually re-create the DNS zone 1.

Right-click the name of the zone, and then click Delete. Click OK to acknowledge any warnings. The Forward Lookup zones no longer list the deleted zone. The New Zone Wizard starts. Click Next to continue. Click the appropriate zone type either Active Directory-integrated or Standard primary, and then click Next. Type the name of the zone exactly as it appears in Network Identification, and then click Next. Click the appropriate zone file, or a new zone file. The newly created zone appears in the DNS Management console.

The Netlogon service is stopped. The Netlogon service is restarted. Refresh the view in the DNS Management console. You can configure this by right-clicking the name of the zone, and then clicking Properties. If dynamic updates are not allowed, all host registration must be completed manually. To configure forwarders on the DNS server: 1. Right-click the name of the server, and then click Properties. Click to select the Enable Forwarders check box.

Note: If the Enable Forwarders check box is unavailable, the DNS server is attempting to host a root zone usually identified by a zone named only with a period, or dot ". The list reads from the top down in order; if there is a preferred DNS server, place it at the top of the list. Click OK to accept the changes. Right-click Network Neighborhood and then click Properties. Click the DNS tab. In the Domain box, type the complete Active Directory domain name.

Click Apply, and then click OK. Click OK to quit the Network tool. Restart the computer. The Host Name line shows the fully qualified domain name. If you must change the DNS domain information after you install Active Directory, you must run the Dcpromo utility on the computer to remove it from the domain and make it a stand-alone server. To determine if a disjointed namespace exists on an existing Windows based domain controller: 1.

Right-click My Computer and then click Properties. Click the Network Identification tab. Compare the DNS suffix section of the full computer name to that of the domain name listing. The full computer name reads as follows: hostname. These two entries should contain identical suffix information.

If these two entries do not contain identical suffix information, a disjointed DNS namespace exists. Note: The only supported method to recover from a disjointed namespace is to use Dcpromo to remove the computer from the domain and make it a stand-alone server. You can then correct the DNS namespace information and run Dcpromo again to promote the computer back to a domain controller. This article assumes that all of the above requirements are fulfilled.

Assign this server a static IP address, subnet mask, and gateway address optional. Select "Append primary and connection specific DNS suffixes" 9. Check "Append parent suffixes of the primary DNS suffix" Note: In Windows Server , unlike Windows , you can choose to install the Replica DC from a backed-up media thus saving considerable amounts of time and bandwidth.

In the Operating System Compatibility window click Next. Choose Additional Domain Controller for an existing domain and click Next. In the Network Credentials window enter the username and password for a Domain Admin in the domain you're trying to join. This step might take some time because the computer is searching for the DNS server. If you enter the domain name in a wrong way you'll get this error message: The wizard will not be able to continue past the domain name window.

If you have wrong DNS settings, i. In the Additional Domain Controller window type or browse to select the domain to which you want to add the replica DC. Whatever you do - remember it! Without it you'll have a hard time restoring the AD if you ever need to do so.

From the command prompt type "net stop netlogon", and after it finishes, type "net start netlogon". If all of the above is ok, I think it's safe to say that your AD is properly installed. When a computer that is running Windows Server is installed and promoted to a domain controller, new Active Directory features are activated by the Windows Server operating system over its Windows counterparts.

Additional Active Directory features are available when all domain controllers in a domain or forest are running Windows Server and the administrator activates the corresponding functional level in the domain or forest read Understanding Function Levels in Windows Server Active Directory for more info.

To activate the new domain features, all domain controllers in the domain must be running Windows Server After this requirement is met, the administrator can raise the domain functional level to Windows Server read Raise Domain Function Level in Windows Server Domains for more info. To activate new forest-wide features, all domain controllers in the forest must be running Windows Server , and the current forest functional level must be at Windows native or Windows Server domain level.

After this requirement is met, the administrator can raise the domain functional level. Note: Network clients can authenticate or access resources in the domain or forest without being affected by the Windows Server domain or forest functional levels.

These levels only affect the way that domain controllers interact with each other. Important Do not raise the forest functional level if you have, or will have, any domain controllers running Windows NT 4. As soon as the forest functional level is raised to Windows Server , it cannot be changed back to the Windows forest functional level. To raise the forest functional level, you must be a member of the Enterprise Admins group.

In order to raise the Forest Functional Level: 1. Log on to the PDC of the forest root domain with a user account that is a member of the Enterprise Administrators group. Under Select an available forest functional level, click Windows Server Read the warning message, and if you wish to perform the action, click Ok. You will receive an acknowledgement message telling you that the operation was completed successfully.

You can check the function level by performing step 3 again and viewing the current function level. Note: To raise the forest functional level, you must upgrade or demote all existing Windows domain controllers in your forest. If you cannot raise the forest functional level, you can click Save As in the Raise Forest Functional Level dialog box to save a log file that specifies which domain controllers in the forest still must be upgraded from Windows NT 4.

If you receive a message that indicates you cannot raise the forest functional level, use the report generated by "Save As" to identify all domains and domain controllers that do not meet the requirements for the requested increase. The current forest functional level appears under Current fo rest functional level in the Raise Forest Functional Level dialog box.

After the forest level is successfully increased and replicated to the PDCs in the domains, the PDCs for each domain automatically increase their domain level to the current forest level. When a computer that is running Windows Server is installed and promoted to a domain controlle r, new Active Directory features are activated by the Windows Server operating system over its Windows counterparts. After this requirement is met, the administrator can raise the domain functional level to Windows Server After this requirement is met, the administrator can raise the domain functional level read Raise Forest Function Level in Windows Server Active Directory for more info.

Important Raising the domain and forest functional levels to Windows Server is a nonreversible task and prohibits the addition of Windows NT 4. Any existing Windows NT 4. Before raising functional levels to take advantage of advanced Windows Server features, ensure that you will never need to install domain controllers running Windows NT 4. To raise the domain functional level, you must be a member of the Domain Administrators group. In order to raise the Domain Functional Level: 1.

Log on the PDC of the domain with domain administrator credentials. In the console tree, right-click the domain node and then click Raise Domain Functional Level. Right-click Users, point to New, and then click User. Type the first name, last name, and user logon name of the new user, and then click Next.

Review the information that you provided, and if everything is correct, click Finish. After you create the new user, give this user account membership in a group that permits that user to perform administrative tasks.

Because this is a laboratory environment that you are in control of, you can give this user account full administrative access by making it a member of the Schema, Enterprise, and Domain administrators groups. To add the account to the Schema, Enterprise, and Domain administrators groups, follow these steps:. On the Active Directory Users and Computers console, right-click the new account that you created, and then click Properties.

Click the Member Of tab, and then click Add. In the Select Groups dialog box, specify a group, and then click OK to add the groups that you want to the list. Repeat the selection process for each group in which the user needs account membership. Click OK to finish. The final step in this process is to add a member server to the domain.

This process also applies to workstations. To add a computer to the domain, follow these steps:. Log on to the computer that you want to add to the domain. Right-click My Computer, and then click Properties. Click the Computer Name tab, and then click Change. Click OK. When you are prompted, type the user name and password of the account that you previously created, and then click OK. A message that welcomes you to the domain is generated. Restart the computer if you are prompted to do so.

Troubleshooting You Cannot Open the Active Directory Snap-ins After you have completed the installation of Active Directory, you may not be able to start the Active Directory Users and Computers snap-in, and you may receive an error message that indicates that no authority can be contacted for authentication. This can occur if DNS is not correctly configured.

To resolve this issue, verify that the zones on your DNS server are configured correctly and that your DNS server has authority for the zone that contains the Active Directory domain name. If the zones appear to be correct and the server has authority for the domain, try to start the Active Directory Users and Computers snap-in again. This is generally considered to be a more advanced feature, as a certain amount of configuration is required, and both site end users will need to understand that new email addresses are required and then understand what the results are.

Click on the Features node in the Server Manager pane. Click on Add Features in the Features Summary pane.

Click the Add Required Role Services button. Note on the next page that the only new role service which will be installed is the IIS 6 Management Console, and click Next. To finish the configuration, follow the below steps:. In the Directory Management Service section, leave No selected. If Yes is selected, users can create distribution groups and contacts, but an AD container needs to be identified where new distribution groups and contacts will be created and additional settings configured.

This is a more complex configuration to administer and not recommended for most test implementations. On this article we will describe a step by step configuration and installation of the SMTP Server feature and how to enable the smtp to relay from local server. Step 1: Step 2: Step 3: Click on Install wait until finish and click close Step 4: Waiting for installation to finish and clicking on Close Step 5: Opening IIS 6.

Step 6: Step 7: Select Relay under Access Tab Step 8: Select Only the list below and click on Add button Step 9: Enter IP Address Step Sending a manual email through telnet to confirm everything working successfully. Telnet localhost 25 or telnet yourpublicip 25 and make sure you open the specific port on your firewall to be available to public. For me hMailServer works very well.