Automate am9 installation

If the vehicle starts then the starter kill system is not armed. Turn key off and wait for 40 seconds. Turn the key to the start position and the vehicle should not start. Turn the key OFF and then cycle the key from off to start position 3-times within 5 seconds and then hold in the start position on the 4th turn. Press button 1 on the transmitter within 5 seconds the starter cranks. Turn the key OFF and wait 30 seconds.

Press transmitter button 1, turn the key to start, the vehicle should not start. Test transmitter button 2. Turn the key to ignition and press transmitter button 2. Turn the key to start. Or is there a way to make one to work? All the other wires seem to be here, whoever removed it from her old car just snipped the wires.

If I have to get all new wires I will do that. Going into a Pontiac Grand am with the Passlock 2 she says. What wire do I use to connect the bypass? By the way, I have a Bulldog universal bypass. I am looking for the wire that I connect the white wire from bypass to.

Need help with step 6 and 7 for Automate AM9. Locate the wire harness coming from the ignition switch. See Making Connections, figure 3 below. Tape these wires up and do not use. In that car there will be three wires 1. As for the White wire connect that to a ignition wire at the switch becuase it needs to see ignition. The first 6 steps do as they are printed above. The 8th Step you take the white wire from the bulldog and hook that up to ignition Best place is to get is at the ignition switch, should be a pink or dk.

The 9th Step is the same as above. Close Menu. Car Security. Ohm's Law Calculators. Relay Diagrams. Subwoofer Wiring. Vehicle Wiring. Recent Topics. Site Search. Site Menu. Advanced Search. Members Search Register Login.