Razr v3i install lens

This glass can be removed by opening the upper casing. You can get to the lens for cleaning by using this guide. The tab that connects the camera to the motherboard may be disconnected. This can happen if the phone has been dropped from high distance onto a hard surface. This can be fixed by opening the internal casing and reattaching the tab.

If the camera still doesn't work, the camera needs to be replaced. To install a new camera in your phone or reconnect the tab use this guide. Make sure that in-call volume is turned up. This can be done by hitting the side volume buttons during a call, or by going under settings and turning up the in call volume.

Often this can happen because the side button is pressed in your pocket or in your purse causing the volume to drop. Your phone may be paired with a Bluetooth headset or device. This can happen if your device is set to discover-able and someone else is connecting to your phone.

If so, your device may be sending the sound to the headset instead of the internal speaker. Under settings, turn Bluetooth pairing off. Sometimes the phone is malfunctioning and simple restart can fix the problem. Restart the phone by holding down the red "end call" button until the phone turns off and on. If your phone continues to have no sound during calls, the call speaker must be replaced. This often happens due to water damage, or the phone was dropped on a hard surface. In order to replace the speaker the entire the LCD screens and the speaker must be replaced.

To install a new call speaker use this guide. Then, I played 1 of the ringtones, and it worked. Before the reboot, it could only play:. Oh, and the port is loose, it got really hot when I put in the new battery, and constantly restarts and freezes.

Fix Your Stuff Community Store. Motorola Razr V3 Troubleshooting. Edit Options History. The phone will not turn on.

The battery is dead. The battery must be replaced. Be careful not to damage the ribbon cable when pulling it off, as it can be fragile. Be careful not to rip buttons off of the board. You will feel some resistance from the adhesive, but they should easily fold up if they are pulled from the bottom.

It should come out pretty easy. If it is not budging go back and check over the steps again. Cancel: I did not complete this guide. Badges: Fix Your Stuff Community Store.

Difficulty Moderate. Steps Time Required 45 minutes. Sections 3. Flags 1. Featured Student Guide This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff. Introduction If your screen is damaged or has dust underneath the plastic cover, it may need to be removed. There's a pinky-purple lustre to the outer casing that's officially termed graphite. In the centre of the outer casing is a front screen that measures a tiny 19 x 16mm.

You might expect it to be larger given its huge black surround. This is prone to gathering greasy fingermarks, which is annoying as their smears detract from the generally smooth, clean-shaven looks of the outer casing.

You can't take calls without opening the clam, but the front screen tells you who is trying to get through, and then opening it up connects you. To end the call when you're done, you just flip the clam shut. Except, irritatingly, if you are using the hands-free speaker, when closing the flip doesn't end the call. You need to do that manually. The teeny lens for the 1. A long, thin lozenge of a shiny silver button sits on the right edge of the casing. You can use this to make voice recordings, but only when the clamshell is open.

A twin to this lozenge sits on the left edge, and this one lets you change the device volume by rocking it when the clamshell is opened. When it is closed, pressing this button calls up a Ring Styles notification on the front screen, and you use a smaller button beneath the rocker to switch between styles.

The rocker, incidentally, doubles as a camera zoom control when the flip is closed, and the front screen doubles as a viewfinder for taking self portraits. There's another small shortcut that launches the camera and acts as the shutter when the flip is open or closed. The left edge contains one further important gizmo -- a multi-purpose mini USB connector for power charger, connector cable to a PC, and headphones. There's been no update to the x pixels of the original RAZR, which is a shame, but both displays keep the old spec, and at least the inner one is clear and bright.

The number pad holds no surprises. The RAZR-style method of separating keys with a barely raised bar of colour is intact, and the buttons are all large and easy to find, though if you want a really tactile feel to key presses you should look elsewhere.

Between the call and end buttons sit the softkey buttons, the left one a quick key for Internet connection, and the right one for messaging. Again, there is an imposed limit on the number of songs you can sync with iTunes -- this time it's a song restriction, up from 50 on the ROKR.